Banner
Qinhuangdao fine decoration delivery room should how to inspect the room
- 2021-05-20-

  Qinhuangdao fine decoration delivery room should how to inspect the room?

  1. Check the structure of the house

  When examining the hardcover room, it is necessary to see whether the structure of the house is in accordance with the contract。The whole house needs to be inspected, checking the area, location and orientation, and measuring the common area。Errors must be raised before check-in。If it is only a non-structural problem, you can truthfully make a written record at the time of handover, and ask the real estate agent to make a written repair commitment within a certain period of time。

  2.Check the brand and quantity

  When some fine decoration buildings are accepted, the owner will find that the security door, sanitary ware, decorative materials, lamps, and overall cabinets are inconsistent with the brand agreed on in the original contract。Therefore, it is recommended that the owner should not rush to check the quality of the construction project during the acceptance, and take some time to check the equipment problem first, because the brand of the equipment has changed, which means that the quality of the housing has changed。

  3.Test air

  When accepting the hardcover room, it is not only necessary to look at the various facilities in the house, but also to check whether the air quality in the house is up to standard。If the air contains a large number of toxic substances, it will certainly affect the health and life of residents。Therefore, when accepting houses, air quality detection is a more important link。

  4.Check water, electricity and coal

  Check the water, electricity and coal of the hardcover room, mainly to observe whether the tap water is normal, and whether the sewer and floor drain are smooth。Check drains and floor drains。Pour a basin of water over the drains and floor drains to see if the flow is smooth and normal。Circuit, because the deep circuit is usually in the wall, even technicians are difficult to judge, so the circuit inspection is usually solved by turning on and off the light。

  5.Check the walls and walls

  When checking the house, pay attention to whether the corner line is straight, whether the wall is smooth, and whether there are cracks。If it is found that it is necessary to find out whether it is a crack in the housing structure, ask the developer to check and deal with it;To check whether there is an empty drum under the wall, just tap with a small hammer and you can hear whether there is an empty drum below。If you don't have a small hammer, you can use a dollar coin or a small stick that you carry with you。

  6.Check the floor and tile

  When buyers check the floor tiles, they must first see whether the overall coordination and foot feeling are consistent, whether the floor has bulging deformation or serious color difference, whether there is noise on the step, whether the seam with the baseboard is tight, walk slowly in each room, and listen carefully to no noise or uneven。

  7.Check the quality of kitchen utensils

  Check whether the kitchen utensils in the hardcover room have cracks, scratches, enamel falling off, whether the cabinet door can be opened and closed freely, and whether the screws are falling off。Water and drain the vegetable basin repeatedly, and check whether the water pipe is blocked by foreign matter。If the drainage pipe is smooth, open the faucet to drain water, see if there is leakage and blockage in the water, and then look at the water pressure, and observe whether the drainage speed is ideal。

  8. Hidden works

  The so-called hidden engineering is the channel transformation, line transformation, ceiling structure, toilet waterproof engineering, etc。Many buyers are not familiar with these, do not know how to start。At this time, it is recommended to find friends or technical people who understand the relevant knowledge。The important precautions for acceptance of these items are briefly described。


" class="hidden">汉朝百科